ASTM D750-04 pdf free

04-08-2021 comment

ASTM D750-04 pdf free.Standard Test Methods for Coated Fabrics.
1. This test method is used to estimate the relative heat deterioration resistance of fabrics coated with rubber or plastics. No exact correlation between this accelerated test and the natural life of coated fabrics is given or implied since the rate of deterioration during the nomal life of coated fabrics varies widely, depending on the condition of exposure to heat, light, and air and on the composition of the coated fabric. This
accelerated test is comparative only and must be evaluated against the performance of coated fabrics, of which both the natural and accelerated aging characteristics are known.
2.This aging test of coated fabrics consists of subjecting test specimens having previously determined physical properties to controlled deteriorating infuences for known periods , after which the physical properties are again measured and compared with corresponding properties of unaged specimens. The test involves exposure of the specimens to an elevated . temperature in air at atmospheric pressure. The test is designated as an oven-aging test. It does not include exposure to light.
3. The selection of the aging time and temperature will depend on the purpose of the test and the type of coated fabric. This selection indicates whether an accelerated aging or a simulated service (heat) test is being used.
4.The physical properties used to measure the deterioration of coated fabrics, in addition to visual and manual inspections, are breaking strength, burst strength, tear strength, or other desired physical properties. Except as otherwise specified, the determination of these properties before and after aging shall be carried out in accordance with these test methods.
5.  Except as otherwise specifed, the apparatus shall confom to the apparatus section of Test Method D 573.
6.1 Prepare specimens as described in these test methods. Use at least three specimens to determine both the original and aged physical properties.
6.2 The material used for identifying the test specimens should not injure the test specimens or become destroyed during aging. ASTM D750 paf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS ISO ASTM 52904:2021 pdf free Free AS Standards

AS ISO ASTM 52904:2021 pdf free

AS ISO ASTM 52904:2021 pdf free.Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications. 5 Feedstock and Powder Batches 5.1 The material supplier shall package the powder...
Get More
AS ISO/ASTM 52901:2021 pdf free Free AS Standards

AS ISO/ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing - General principles - Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see ISO 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including...
Get More
AS 2455.2:2019 pdf free download Free ASTM Standards

AS 2455.2:2019 pdf free download

AS 2455.2:2019 pdf free download.Textile floor coverings - Installation practice Part 2: Carpet tiles. 4 Pre-laying requirements 4.1 General Pre-laying requirements shall be in accordance with AS 2455.1. Prior to commencement, it should be ascertained that carpet...
Get More


Anonymous netizen Fill in information