ASTM B582-02 pdf free.Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip.
The chemical composition and mechanical propertiesof the material as enumerated in this specification shall bedetermined, in case of disagreement,in accordance with thefollowing ASTM standards: Chemical Analysis—Test Methods E 1473.For ele-ments not covered by Test Methods E 1473,the referee testmethod shall be as agreed upon between the manufacturer andthe purchaser. The composition of the remainder element shallbe determined arithmetically by difference.Tension Test—Test Methods E 8.Rockwell Hardness Test-Test Methods E 18.13.1.4 Hardness Conversion—Hardness Conversion TablesE140.Determining Significant Places—Practice E 29.13.1.6 Method of Sampling—Practice E 55.For purposes of determining compliance with thespecified limits for requirements of the properties listed in thefollowing table,an observed or calculated value shall berounded in accordance with the rounding method of PracticeE 29.
Material that fails to conform to the requirements ofthis specification may be rejected.Rejection should be reportedto the producer or supplier promptly and in writing. In case ofdissatisfaction with the results of the test,the producer orsupplier may make claim for a rehearing.
CertificationWhen specified in the purchase order or contract,amanufacturer’s certification shall be furnished to the purchaserstating that material has been manufactured，tested,and in-spected in accordance with this specification, and that the testresults on representative samples meet specification requirements. When specified in the purchase order or contract,areport of the test results shall be furnished.Each plate, sheet, or strip shall be marked on one facewith the specification number，heat number，manufacturer’sidentification, and size.The markings shall have no deleteriouseffect on the material or its performance and shall be suffi-ciently stable to withstand normal handling.
Each bundle or shipping container shall be markedwith the name of the material; this specification number; alloy;the size; gross, tare, and net weight; consignor and consigneeaddress; contract or order number; and such other informationas may be defined in the contract or order.ASTM B582 pdf download.