ASTM B435-03 pdf free.Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip.
This standard does not purport to address all of thesafety concerns，if any,associated with its use. It is theresponsibility of the user of this standard to become familiarwith all hazards including those identified in the appropriateMaterial Safety Data Sheet for this product/material as provided by the manufacturer; to establish appropriate safety andhealth practices, and determine the applicability of regulatorylimitations prior to use.
Material furnished under this specification shall con-form to the applicable requirements of Specification B 906unless otherwise provided herein.
It is the responsibility of the purchaser to specify allrequirements that are necessary for material ordered under thisspecification. Examples of such requirements include, but arenot limited to the following:Thickness (in decimals of an inch),width, and length (inch or fraction of an inch),
Certification-State if certification or a report of testresults is required (Specification B 906,Section 21),Plate; state how plate is to becut (Specification B 906,Table A2.3), Purchase Inspection-State which tests or inspectionsare to be witnessed (Specification B 906,Section 18), and5.1.6 Samples for Product (Check) Analysis—State whethersamples should be furnished (Specification B 906，Section7.2.2).The material shall conform to the requirements as tochemical composition prescribed in Table 1. If a product (check) analysis is made by the purchaser,the material shall conform to the requirements specified inTable 1 and Specification B 906.Each plate,sheet, or strip shall be marked on one facewith the specification number, alloy, heat number, manufactur-er’s identification,and size. The markings shall have nodeleterious effect on the material or its performance and shallbe sufficiently stable to withstand normal handling.Each bundle or shipping container shall be marked withthe name of the material; this specification number; alloy; thesize;gross，tare，and net weight; consignor and consigneeaddress; contract or order number; and such other informationas may be defined in the contract or order.ASTM B435 pdf download.