ISO 2067-2019 pdf free.Granulated cork, broken cork and crushed cork — Sampling for the determination of moisture content.
This document specifies a sampling method for the determination of moisture content of granulatedcork, broken cork and crushed cork.
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references, only the edition cited applies.Forundated references, the latest edition of the referenced document (including any amendments) applies.
ISO 633,Cork — Vocabulary
For the purposes of this document, the terms and definitions given in IS0 633 apply.
The whole package shall be handled in batches and, in the case of products in packages, all the packagesof a same batch shall be identical and include, in a similar proportion, a single type of cork (granulatedcork, broken cork or crushed cork) from those mentioned in the title of this document.
No more than 24 h shall elapse between the time of determination of the initial total mass of the batchand the time at which the laboratory samples are made.Determine the total initial mass of the batch by direct weighing.
From the whole batch, take randomly at least 25 l of granulated cork, broken cork or crushed cork, atpoints distant from each other and well distributed in the batch.Divide the approximately 25 l of granulated cork, broken cork or crushed cork into two similarlaboratory samples and place them in properly identified and hermetically sealed containers.Onelaboratory sample shall be directly used for the moisture test and the other one shall be given to theentity responsible for the sampling, for a possible control.Count the total number of packages in the batch.Determine the total initial mass of the batch(mass of packages included) by direct weighing.From the whole batch, take randomly some packages containing granulated cork, broken cork orcrushed cork: 5 packages minimum which will correspond to at least 50 1.Open each package and determine the corresponding mass of each one.Extrapolate the value obtainedfor the total number of packages, thus obtaining the total mass of the packages.From the different opened packages, take randomly an equal volume of granulated cork, broken cork orcrushed cork, in order to obtain a total mass of about 25 1.Divide the approximately 25 l of granulated cork, broken cork or crushed cork into two similarlaboratory samples and place them in properly identified and hermetically sealed containers. Onelaboratory sample shall be directly used for the moisture test and the other one shall be given to theentity responsible for the sampling, for a possible control.ISO 2067 pdf download.