ISO 11971-2020 pdf free

04-21-2021 comment

ISO 11971-2020 pdf free.Steel and iron castings —— Visualtesting of surface quality.
1.1This document covers the acceptance criteria for the visual testing of the surface of steel and ironcastings.
2 Normative References:There are no normative references in this document.
3Terms and Definitions:
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
ISO Online browsing platform: available at https://www.iso.org/obp
—IEC Electropedia: available at http://www.electropedia.org/
4Ordering information:The enquiry and order should specify the following information:
a) the casting areas where the surface is to be tested should be clearly indicated on the drawing or solidmodel;
b) the number of castings to be tested;
c) the acceptance level: more than one acceptance level may be specified for different surfaces of the samecasting;
d)if any types of discontinuities are unacceptable.
5Test method:The area to be tested shall be examined without optical aids exceeding lx magnification.The comparators define the worst or roughest condition for that acceptance level.
6.Acceptance criteria:
a} The SCRATA comparator set is used for steel or iron castings.
b) The BNIF comparator set SI and S2 categories can be used for all alloys. Category S3 is used for steelcastings only.
Table i lists BNlF and SCRATA comparators for surface roughness and gives the equivalency between BNIFand SCRATA comparators for surface roughness, mechanical dressing and thermal dressing.Table 2 lists the SCRATA surface-discontinuity comparators.
Levels of acceptance for surface roughness and discontinuities may be specified by the customer.In Annex A.Table A.1 and Table A.2 give guidance on optional roughness acceptance and surfacediscontinuity acceptance.Surface discontinuities not covered by this document shall be a matter of agreement between the purchaserand manufacturer.
7.Test report:The manufacturer shall, if requested by the purchaser at the time of enquiry and order, keep a record of thetestresults and provide a test report.
The records of the manufacturer shall contain the following:a) the identification of the castings;
b) the name and qualification of the person undertaking the testing;c) the reference of the comparator used;
d) the designated category and level of each area tested for the surface condition;e) date of the testing.ISO 11971 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS ISO ASTM 52904:2021 pdf free Free AS Standards

AS ISO ASTM 52904:2021 pdf free

AS ISO ASTM 52904:2021 pdf free.Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications. 5 Feedstock and Powder Batches 5.1 The material supplier shall package the powder...
Get More
AS ISO/ASTM 52901:2021 pdf free Free AS Standards

AS ISO/ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing - General principles - Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see ISO 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including...
Get More
AS ISO 16809:2020 pdf free Free AS Standards

AS ISO 16809:2020 pdf free

AS ISO 16809:2020 pdf free.Non-destructive testing — Ultrasonic thickness measurement. 5 General requirements 5.1 Instruments The following types of instruments shall be used to achieve thickness measurement: a) dedicated ultrasonic thickness measurement instruments with numerical display showing...
Get More

LEAVE A REPLY

Anonymous netizen Fill in information