ASTM B418-01 pdf free.Standard Specification for Cast and Wrought Galvanic Zinc Anodes. The anode shall be made from Special High Grade zincconforming to Specification B 6, with suitable alloying addi-tions for Type I anodes.Composition of the anode...
ASTM B423-03 pdf free
ASTM B423-03 pdf free.Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube. This specification2covers nickel-iron-chromium-molybdenum-copper alloys (UNS N08825 and N08221)inthe form of cold-worked and hotfinished seamless pipe andtube intended for general corrosive service....
ASTM B424-98a pdf free
ASTM B424-98a pdf free.Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Plate,Sheet, and Strip. The edgewise curvature (depth of chord) of flat sheet,strip, and plate shall not exceed 0.05 in. (1.27 mm) multipliedby the length...
ASTM B425-99 pdf free
ASTM B425-99 pdf free.Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar. The material shall conform tothe mechanical properties specified in Table 2.The permissible varia-tions from the specified dimensions as measured on thediameter...
ASTM B427-02 pdf free
ASTM B427-02 pdf free.Standard Specification for Gear Bronze Alloy Castings. The castings shall conform to the requirements as tochemical composition prescribed in Table 2.These specification limits do not preclude the presenceof other elements. Limits may be established...
ASTM B428-93 pdf free
ASTM B428-93 pdf free.Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube. 1.1 This test method establishes the requirements for thedetermination of the angle of twist in rectangular and squarecopper...
ASTM B429-02 pdf free
ASTM B429-02 pdf free.Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube. The maximum and minimum wall thicknesses,outsidediameters and nominal weights of standard sizes of pipe areshown in Table 3. The pipe or tube shall be supplied...
ASTM B430-97 pdf free
ASTM B430-97 pdf free.Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry. Fill the sedimentation cell to the proper height (seeNote 3).Adjustment of the final liquid level may be done...
ASTM B432-04 pdf free
ASTM B432-04 pdf free.Standard Specification for Copper and Copper Alloy Clad Steel Plate. Clad plates less than 0.375 in. (9.5 mm) totalminimum composite thickness shall be visually inspected forbond integrity prior to shipment. Clad plates 0.375 in....
ASTM B434-00 pdf free
ASTM B434-00 pdf free.Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet, and Strip. The material shall be uniform in quality and condition,smooth,and free of injurious imperfections. Lots for Chemical Analysis and Mechanical Testing:9.1.1 A...