ASTM B363-03a pdf free.Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings. Forging，forming,or shaping operations may be per-formed by hammering, pressing, piercing, extruding, upsetting,rolling, bending, fusion welding, or by a combination of two...
ASTM B364-96 pdf free
ASTM B364-96 pdf free.Standard Specification for Tantalum and Tantalum Alloy Ingots. The material shall conform to the requirements forchemical composition in accordance with Table 1.Analysis for elements not listed in Table 1 and notnormally expected in tantalum...
ASTM B365-98 pdf free
ASTM B365-98 pdf free.Standard Specification for Tantalum and Tantalum Alloy Rod and Wire. Tension Tests—Prepare and test test specimens inaccordance with Test Methods E 8. Determine tensile proper-ties using a strain rate of 0.003 to 0.007 in./(in.min)...
ASTM B366-04 pdf free
ASTM B366-04 pdf free.Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings. The finished fittings shall conform to the minimumUNS N06625 Grade 2 mechanical properties as prescribed forthe representative starting raw material product listed in Table2...
ASTM B367-93 pdf free
ASTM B367-93 pdf free.Standard Specification for Titanium and Titanium Alloy Castings. The surface of the casting shall be free of adhering moldmaterial, scale，cracks，and hot tears as determined by visualexamination.Other surface discontinuities shall meet the visualacceptance standards specified...
ASTM B368-97 pdf free
ASTM B368-97 pdf free.Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test). Cleaning Tested Specimens—Unless specified in thespecifications covering the material or product being tested,carefully remove specimens at the end of the test, rinse...
ASTM B369-96 pdf free
ASTM B369-96 pdf free.Standard Specification for Copper-Nickel Alloy Castings. When specified in the purchase order at least one testcast as shown in Fig.1 shall be prepared for each lot of weldinggrade castings (4.2.6). The block shall be...
ASTM B370-03 pdf free
ASTM B370-03 pdf free.Standard Specification for Copper Sheet and Strip for Building Construction. Samples for all other tests shall be taken from thesample portions of 13.1.2 and be of a convenient size toaccommodate the test and comply...
ASTM B371/B371M-02 pdf free
ASTM B371/B371M-02 pdf free.Standard Specification for Copper-Zinc-Silicon Alloy Rod. When product is purchased for agencies of the U.s.Government.The following requirements are optional and shall beincluded in the contract or purchase order when required:4.2.1 Mercurous nitrate test,Certification (Specification...
ASTM B372-97 pdf free
ASTM B372-97 pdf free.Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube. Samples for chemical analysisshall be taken in accordance with Practice E 255. Drillings,millings,and so forth,shall be taken in approximately equalweight from each of the...