ASTM B88-2020 pdf free

04-10-2021 comment

ASTM B88-2020 pdf free.Standard Specification for Seamless Copper Water Tube.
Tension test results on material covered by this specification are not seriously affected by variations in speed oftesting.It is not prohibited to use a considerable range oftesting speeds; however,the rate of stressing to the yield strength shall not exceed 100 ksi/min.Above the yiela screngnrthe movement per minute of the testing machine head under
load shall not exceed 0.5 in./in. of gage length (or distancebetween grips for full-section specimens).
1The specimen(s) shall be prepared in accordancewith Test Methods B577.The surface of the test specimen shall approximate aradial longitudinal section of the tube.
For purposes of determining compliance with thespecified limits for requirements of the properties listed inTable 7, an observed value or calculated value shall be roundedas indicated in accordance with the rounding method ofPractice E29.
The manufacturer or supplier shall inspect and maketests necessary to verify the furnished product conforms tospecification requirements.Source inspection of the product by the purchaser maybe agreed upon between the manufacturer or supplier and thepurchaser as part of the purchase order. In such case, the natureof the facilities needed to satisfy the inspector, representing the purchaser,that the product is being furnished in accordancewith the specification shall be included in the agreement. Alltesting and inspection shall be conducted so as not to interfereunnecessarily with the operation of the works.
When mutually agreed upon,the manufacturer orsupplier and the purchaser shall conduct the final inspectionsimultaneously.
Product that fails to conform to the specification requirements when tested by the purchaser or purchaser’s agentshall be subject to rejection.Rejection shall be reported to the manufacturer orsupplier promptly. In addition, a written notification of rejec-tion shall follow.In case of dissatisfaction with results of the test uponwhich rejection is based, the manufacturer or supplier shallhave the option to make claim for a rehearing.As a result of product rejection, the manufacturer orsupplier shall have the option to make claim for a retest to beconducted by the manufacturer supplier and the purchaser.Samples of the rejected product shall be taken in accordancewith this specification and subject to test by both parties usingthe test method(s) specified in this specification,oralternatively, upon agreement of both parties, an independentlaboratory may be selected for the test(s) using the testmethod(s) specified in this specification.ASTM B88 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS ISO ASTM 52904:2021 pdf free Free AS Standards

AS ISO ASTM 52904:2021 pdf free

AS ISO ASTM 52904:2021 pdf free.Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications. 5 Feedstock and Powder Batches 5.1 The material supplier shall package the powder...
Get More
AS ISO/ASTM 52901:2021 pdf free Free AS Standards

AS ISO/ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing - General principles - Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see ISO 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including...
Get More
AS 2455.2:2019 pdf free download Free ASTM Standards

AS 2455.2:2019 pdf free download

AS 2455.2:2019 pdf free download.Textile floor coverings - Installation practice Part 2: Carpet tiles. 4 Pre-laying requirements 4.1 General Pre-laying requirements shall be in accordance with AS 2455.1. Prior to commencement, it should be ascertained that carpet...
Get More


Anonymous netizen Fill in information