ASTM B599-92 pdf free

04-14-2021 comment

ASTM B599-92 pdf free.Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip.
Spot grinding to remove surface imperfections ispermitted for material produced in accordance with 10.1.1.1,10.1.2.1,10.1.3.1,and 10.1.3.2, provided such grinding doesnot reduce the thickness or width at any point beyond thepermissible variations in dimensions.
Lots of Chemical Analysis,Mechanical Testing,andCorrosion Testing:A lot for chemical analysis shall consist of one heat.A lot of plate for testing and inspectionpurposes shall consist of the products resulting from the rollingof one heat of material in the same condition and specifiedthickness, solution annealed by the same practice, but in nocase more than 25 000 lb (11 340 kg).A lot of sheet or strip for testingand inspection purposes shall consist of material from one heatin the same form (sheet or strip),condition,finish,andspecified thickness, solution annealed by the same practice butin no case more than 25 000 lb (11 340 kg).
A representative sample shall be taken from each lotduring pouring or subsequent processing.Product analysis, if performed, shall be wholly theresponsibility of the purchaser.A sample of the material to provide test specimensfor mechanical tests shall be taken from such a location in eachlot as to be representative of that lot.When samples are to be taken after delivery,thepurchaser of material ordered to cut lengths may request on thepurchase order additional material of adequate size to providesample coupons for inspection purposes.
A sample for corrosiontesting shall be taken from a location chosen to be representa-tive of the lot.In the case of sheet or strip supplied in coil form, twoor more tension tests (one from each end of each coil), and oneor more hardness tests shall be made on specimens taken fromeach end of the coil. When material is supplied in flat sheet, flatstrip, or plate, one tension and one or more hardness tests shallbe made on each 100 or less sheets, strips, or plates of the samelot. When specified, one corrosion test shall be conducted foreach lot.If any specimens selected to represent any lot fail tomeet any of the test requirements, the material represented bysuch specimens may be retested. If there is valid reason tobelieve the result is not representative, the material may berereannealed and retested.
Tension test specimens from material under 1/ in. (12.7mm) in thickness shall be of the full thickness of the materialand machined to the form and dimensions shown for thesheet-type specimen in Test Methods E 8.Tension test speci-mens from material 1/ in. (12.7 mm) and over shall be of thefull thickness of the material,machined to the form anddimensions shown for the plate-type specimen in Test MethodsE8, or shall be the largest possible round specimen shown inTest Methods E 8. Tension test specimens shall be taken frommaterial after final heat treatment and shall be selected in thetransverse direction unless prohibited by width.Corrosion test specimens shall be prepared so that atleast one major surface represents the as-supplied surface, withonly light surface grinding permitted on this surface.ASTM B599 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS ISO ASTM 52904:2021 pdf free Free AS Standards

AS ISO ASTM 52904:2021 pdf free

AS ISO ASTM 52904:2021 pdf free.Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications. 5 Feedstock and Powder Batches 5.1 The material supplier shall package the powder...
Get More
AS ISO/ASTM 52901:2021 pdf free Free AS Standards

AS ISO/ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing - General principles - Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see ISO 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including...
Get More
AS 2455.2:2019 pdf free download Free ASTM Standards

AS 2455.2:2019 pdf free download

AS 2455.2:2019 pdf free download.Textile floor coverings - Installation practice Part 2: Carpet tiles. 4 Pre-laying requirements 4.1 General Pre-laying requirements shall be in accordance with AS 2455.1. Prior to commencement, it should be ascertained that carpet...
Get More

LEAVE A REPLY

Anonymous netizen Fill in information