ASTM B575-04 pdf free

04-14-2021 comment

ASTM B575-04 pdf free.Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip.
This specification2covers plate,sheet,and strip oflow-carbon nickel-chromium-molybdenum alloys (UNSN10276,N06022,N06455,N06035,UNS N06058,UNSNO6059),low-carbon nickel-chromium-molybdenum-copperalloy(UNS N06200),low-carbon nickel-chromium-molybdenum-tantalum alloy (UNS N06210),and low-carbonnickel-chromium-molybdenum-tungsten alloy (UNS N06686)as shown in Table 1, for use in general corrosive service.The following products are covered under this specification:Sheet and Strip-Hot or cold rolled,solution an-nealed, and descaled unless solution anneal is performed in anatmosphere yielding a bright finish. Plaie-Hot or cold rolled,solution annealed,anddescaled.The values stated in inch-pound units are to be regardedas the standard. The values given in parentheses are forinformation only.
This standard does not purport to address all of thesafety concerns,if any,associated with its use. It is theresponsibility of the user of this standard to become familiarwith all hazards including those identified in the appropriateMaterial Safety Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety andhealth practices, and determine the applicability of regulatorylimitations prior to use.
Optional Requirement—Plate; state how plate is to becut (Specification B 906,Table A2.3),
Certification-State if certification or a report of testresults is required (Specification B 906,Section 21),
Purchase Inspection-State which tests or inspectionsare to be witnessed (Specification B 906,Section 18),and5.1.6 Samples for Product(Check) Analysis—State whethersamples should be furnished (Specification B 906,7.2.2).6. Chemical Composition
The material shall conform to the composition limitsspecified in Table 1.If a product (check) analysis is made by the purchaser,the material shall conform to the requirements specified inTable 1 and Specification B 906.Mechanical Properties and Other Requirements
Tensile Properties—The material shall conform to theroom temperature tensile properties prescribed in Table 2.7.2 Hardness—The hardness values given in Table 2 areinformative only.Grain Size for Sheet and Strip-Sheet and strip shallconform to the grain sizes as illustrated in Plate 1 of TestMethods E 112.The requirements shall be as indicated in Table3.The permissible variations in thickness ofplate shall be as prescribed in Specification B 906, Table A2.1.ASTM B575 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS ISO ASTM 52904:2021 pdf free Free AS Standards

AS ISO ASTM 52904:2021 pdf free

AS ISO ASTM 52904:2021 pdf free.Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications. 5 Feedstock and Powder Batches 5.1 The material supplier shall package the powder...
Get More
AS ISO/ASTM 52901:2021 pdf free Free AS Standards

AS ISO/ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing - General principles - Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see ISO 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including...
Get More
AS 2455.2:2019 pdf free download Free ASTM Standards

AS 2455.2:2019 pdf free download

AS 2455.2:2019 pdf free download.Textile floor coverings - Installation practice Part 2: Carpet tiles. 4 Pre-laying requirements 4.1 General Pre-laying requirements shall be in accordance with AS 2455.1. Prior to commencement, it should be ascertained that carpet...
Get More

LEAVE A REPLY

Anonymous netizen Fill in information