ASTM B572-03 pdf free.Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod.
If the specimen used in the mechanical test ofany lot fails to meet the specified requirements, two additionalspecimens shall be taken from different sample pieces andtested.The results of the tests on both of these specimens shallmeet the specified requirements.
Tension test specimens shall be taken from materialafter final heat treatment and tested in the direction offabrication.Tension test specimens shall be any of the standard orsubsized specimens shown in Test Methods E 8.In the event of disagreement，the referee specimenshall be the largest possible round specimen shown in TestMethods E 8.The chemical composition and mechanical propertiesof the material as enumerated in this specification shall bedetermined, in case of disagreement,in accordance with thefollowing ASTM methods:Test Methods E 1473. For ele-ments not covered by Test Methods E 1473, the referee methodshall be as agreed upon between the manufacturer and thepurchaser.The composition of the remainder element shall bedetermined arithmetically by difference.Tension Test-Test Methods E 8.12.1.3 Method of Sampling-Practice E 55.
Inspection of the material shall be made as agreed uponbetween the manufacturer and the purchaser as part of thepurchase contract.
Material, tested by the purchaser, that fails to conformto the requirements of this specification may be rejected.Rejection should be reported to the producer or supplierpromptly and in writing. In case of dissatisfaction with theresults of the test, the producer or supplier may make claim fora rehearing.
When specified in the purchase order or contract,amanufacturer’s certification shall be furnished to the purchaserstating that material has been manufactured，tested,and in-spected in accordance with this specification, and that the testresults on representative samples meet specification require-ments. When specified in the purchase order or contract，areport of the test results shall be furnished.
Each piece of material ‘/ in. (12.7 mm) and over indiameter shall be marked with this specification number alloy,name of the material, and size of the product.Each bundle or shipping container shall be markedwith the name of the material; this specification number alloy;the size; gross, tare, and net weight; consignor and consigneeaddress; contract or order number; and such other informationas may be defined in the contract or order.ASTM B572 pdf download.