ASTM B395/B395M-02 pdf free.Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes.
The manufacturer shall inspect and make necessarytests to verify that the product furnished conforms to therequirements of this specification.
If, in addition, the purchaser elects to perform his owninspection, the manufacturer shall afford the inspector, withoutcharge, all reasonable facilities to satisfy him that the tubes arebeing furnished in accordance with this specification.All tests(except product analysis) and inspection shall be made at theplace of manufacture prior to shipment,unless otherwisespecified, and shall be so conducted as not to interfere with theoperation of the works.
The manufacturer, or supplier,and the purchaser mayconduct the final inspection simultaneously by mutual agreement. Material that fails to conform to the requirements ofthis specification when inspected or tested by the purchaser, orpurchaser’s agent, may be rejected. Rejection shall be reported to the manufacturer orsupplier promptly. In addition, a written notification of rejec-tion shall follow.In case of dissatisfaction with results of the test uponwhich rejection is based, the manufacturer,or supplier, maymake claim for a rehearing.
As a result of product rejection, the manufacturer,or supplier,may make a claim for a retest to beconducted by the manufacturer, or supplier, and the purchaser.Samples of the rejected product shall be taken in accordancewith the product specification and subjected to test by bothparties using the test method(s) specified in the productspecification. Alternately,upon agreement of both parties,anindependent laboratory may be selected for the test(s) using thetest method(s) specified in the product specification.When specified in the contract or purchase order, thepurchaser shall be furnished certification that samples repre-senting each lot have been tested or inspected as directed in thisspecification and requirements have been met.
When identified in the ordering information that prod-uct is purchased for ASME Boiler and Pressure Vessel Codeapplications, certification to this specification is mandatory.
When specified in the contract or purchase order,areport of test results shall be furnished.The material shall be separated by size,composition, and temper, and prepared for shipment in such amanner as to ensure acceptance by common carrier fortransportation and to afford protection from the normal hazardsof transportation.Each shipping unit shall be legiblymarked with the purchase order number,metal or alloydesignation, temper, size, shape, total length of piece count,orboth,and name of supplier. The specification number shall beshown,when specified.ASTM B395 pdf download.
ASTM B395/B395M-02 pdf free
Note:
Can you help me share this website on your Facebook or others? Many thanks!