ASTM A276/A276M-17 pdf free

04-07-2021 comment

ASTM A276/A276M-17 pdf free.Standard Specification for Stainless Steel Bars and Shapes.
1.1. Bars shall be furnished in one of the following conditions listed in the Mechanical Requirements table:
1.1.1 Condition A- Annealed.
1.1.2 Condition H- Hardened and tempered at a relatively low temperature.
1.1.3 Condition T- Hardened and tempered at a relatively high temperature.
1.1.4 Condition S- Strain Hardened- -Relatively light cold work.
1.1.5 Condition B- -Relatively severe cold work.
1.1.6 Condition SA- Stabilized annealed.
2.1 The steel shall conform to the requirements for chemical composition specified in Table 1.
2.2 Methods and practices relating to chemical analysis required by this specification shall be in accordance with Test Methods, Practices, and Terminology A751.
3. Mechanical Properties Requirements
3.1 The material shall conform to the mechanical test requirements specified in Table 2.
3.2 The martensitic grades shall be capable of meeting the hardness requirements after heat treating as specified in Table 3.
3.3 Hardness measurements, when required, shall be made at a location midway between the surface and the center of the cross section.
4. When required by the purchase order, the magnetic permeability of Types 201 and 205 in the annealed condition shall not exceed 1.2 as tested by a Severn-type indicator.
5. In addition to the requirements of this specification, all requirements of the current edition of Specification A484/A484M shall apply. Failure to comply with the general requirements of Specification A484/A484M constitutes nonconformance to this specification.
6.1 Upon request of the purchaser in the contract or order,the producer s certification that the material was manufactured and tested in accordance with this specification, together with a certified report of the test results shall be furnished at the time of the shipment.
7. It is the responsibility of the purchaser to specify all requirements that are necessary for material ordered under this specification. Such requirements may include but are not limited to the following:
7.1 Quantity (weight or number of pieces),
7.2 Name of material: stainless steel,
7.3 Form (bars, angles, and so forth),
7.4 Condition (Section 4.1),
7.5 Finish (Section 8 of Specification A484/A484M),
7.6 Surface preparation of shapes (Section 8 of Specification A484/A484M),
3.1.13 Choice of testing track from the options listed in Test Methods A 1058 when material is ordered to an M sufix (SIunits) product standard. If the choice of test track is not specified in the order, then the default ASTM track shall be used as noted in Test Methods A 1058.ASTM A276 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS ISO ASTM 52904:2021 pdf free Free AS Standards

AS ISO ASTM 52904:2021 pdf free

AS ISO ASTM 52904:2021 pdf free.Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications. 5 Feedstock and Powder Batches 5.1 The material supplier shall package the powder...
Get More
AS ISO/ASTM 52901:2021 pdf free Free AS Standards

AS ISO/ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing - General principles - Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see ISO 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including...
Get More
AS 2455.2:2019 pdf free download Free ASTM Standards

AS 2455.2:2019 pdf free download

AS 2455.2:2019 pdf free download.Textile floor coverings - Installation practice Part 2: Carpet tiles. 4 Pre-laying requirements 4.1 General Pre-laying requirements shall be in accordance with AS 2455.1. Prior to commencement, it should be ascertained that carpet...
Get More


Anonymous netizen Fill in information