ISO 7599-2018 pdf free.Anodizing of aluminium and itsalloys — Method for specifyingdecorative and protective anodicoxidation coatings on aluminium.
This document specifies a method for specifying decorative and protective anodic oxidation coatingson aluminium (including aluminium-based alloys). It defines the characteristic properties of anodicoxidation coatings, lists methods of test for checking the characteristic properties, provides minimumperformance requirements, and gives information on the grades of aluminium suitable for anodizingand the importance of pretreatment to ensure the required appearance or texture of the finished work.
a) non-porous anodic oxidation coatings of the barrier layer type,
b) anodic oxidation coatings produced by chromic acid or phosphoric acid anodizing,
c)anodic oxidation coatings intended merely to prepare the substrate for subsequent application of organic coatings or for the electrodeposition of metals, and
d) hard anodic oxidation coatings used mainly for engineering purposes, for which abrasion and wear
resistance are the primary characteristics (see ISo 10074).
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references, only the edition cited applies. Forundated references, the latest edition of the referenced document (including any amendments) applies.ISO 1463,Metallic and oxide coatings — Measurement of coating thickness—Microscopical method
ISo 2085,Anodizing of aluminium and its alloys —Check for continuity of thin anodic oxidation coatings—Copper sulfate test
ISO 2106,Anodizing of aluminium and its alloys —Determination of mass per unit area (surface density) ofanodic oxidation coatings —Gravimetric method
ISo 2128,Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidationcoatings — Non-destructive measurement by split-beam microscope
ISo 2143,Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodicoxidation coatings after sealing —Dye-spot test with prior acid treatment
ISO 2360,Non-conductive coatings on non-magnetic electrically conductive base metals — Measurementof coating thickness —Amplitude-sensitive eddy-current method
ISo 2376,Anodizing of aluminium and its alloys —Determination of electric breakdown potential
ISO 2931,Anodizing of aluminium and its alloys —Assessment of quality of sealed anodic oxidation coatingsby measurement of admittance
IS0 3210,Anodizing of aluminium and its alloys —Assessment of quality of sealed anodic oxidation coatingsby measurement of the loss of mass after immersion in acid solution(s).ISO 7599 pdf download.