BS EN ISO 5912:2020 pdf free.Camping tents — Requirements and test methods.
1.scope:This document specifies the requirements on safety, performance and fitness for use of camping tents.NOTEFor caravan awnings, see ISo 8936.
2.Normative references:The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references,only the edition cited applies.Forundated references, the latest edition of the referenced document (including any amendments) applies.IS0 105-A02,Textiles —Tests for colour fastness — Part AO2:Grey scale for assessing change in colourISO 105-B04,Textiles — Tests for colour fastness — Part B04:Colour fastness to artificial weathering:Xenon arc fading lamp test.ISo 105-X12,Textiles —Tests for colour fastness — Part X12: Colour fastness to rubbingISo 139, Textiles —Standard atmospheres for conditioning and testing
ISO 554, Standard atmospheres for conditioning and/or testing —Specifications
ISo 811,Textiles —Determination of resistance to water penetration— Hydrostatic pressure test
ISO 2081,Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementarytreatments on iron or steel
ISO 4675:2017,Rubber- or plastics-coated fabrics — Low-temperature bend test
ISO 6925,Textile floor coverings — Burning behaviour —Tablet test at ambient temperature
ISO 6941:2003，Textile fabrics — Burning behaviour ― Measurement of flame spread properties ofvertically oriented specimens
ISO 7152,Camping tents and caravan awnings — Vocabulary and list of equivalent terms
ISO 7771,Textiles —Determination of dimensional changes of fabrics induced by cold-water immersionISo 9227,Corrosion tests in artificial atmospheres — Salt spray tests
IS0 13934-2,Textiles —Tensile properties of fabrics — Part 2: Determination of maximum force using thegrab method
IS0 13937-2,Textiles —Tear properties of fabrics — Part 2: Determination of tear force of trouser-shapedtest specimens (Single tear method)
ISO 23388,Protective gloves against mechanical risks
3.3.1.base area:area limited by the outer tent walls, which contact the ground.Note 1 to entry: This area does include tents and canopies, but excludes area for guy lines, mud walls andsnowskirts.[SOURCE:ISO 7152:1997,1.3.2, modified— Note 1 to entry has been added.]
3.2.outer tent dimensions:dimension of the smallest rectangular pitching space necessary for the camping tent excluding guy lines.
3.3:inner tent area:part of the base area (3.1) designated for living and sleeping.BS EN ISO 5912 pdf download.