AS ISO 13007.1:2020 pdf free

04-20-2021 comment

AS ISO 13007.1:2020 pdf free.Ceramic tiles — Grouts and adhesives.
This part of lSo 13007 applies to ceramic tile adhesives for internal and external tile installations onwalls and floors.
This part of lS0 13007 gives the terminology, concerning the products, working methods, applicationproperties, etc., for ceramic tile adhesives
This part of lSo 13007 specifies the values of performance requirements for all ceramic tile adhesives[cementitious (C), dispersion (D) and reaction resin (R) adhesives].This part of lSo 13007 does not contain criteria or recommendations for the design and installation ofceramic tiles.NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones, etc.)where these do not adversely affect the materials.
The following documents, in whole or in part, are normatively referenced in this document and areindispensable for its application. For dated references, only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.
ISo 13006,Ceramic tiles —Definitions, classification, characteristics and marking
ISO 13007-2,Ceramic tiles —Grouts and adhesives —Part 2: Test methods for adhesives
For the purposes of this document, the following terms and definitions apply.3.1
fixing surface:surface on which the tile is installed or fixed3.2wall and floor tiles: tiles made out of ceramic tile or natural and agglomerated stones
Note 1 to entry: IS0 13006 should be used for definitions,classification, characteristics and marking ofceramic tile.
cementitious adhesive (c) mixture of hydraulic binding agents, aggregates, and organic additives,to be mixed with water or liquidadmix just before use
dispersion adhesive (D) ready for use mixture of organic binding agent(s) that is in the form of an aqueous polymer dispersion,organic additives and mineral fillers.reaction resin adhesive (R)single or multi-component mixture of synthetic resin, mineral fillers and organic additives in whichcuring occurs by chemical reaction.notched trowel:toothed tool, which makes it possible to apply the adhesive as a series of ribs of a uniform thicknessonto the fixing surface and/or the reverse face of the tile.AS ISO 13007 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS ISO ASTM 52904:2021 pdf free Free AS Standards

AS ISO ASTM 52904:2021 pdf free

AS ISO ASTM 52904:2021 pdf free.Additive manufacturing - Process characteristics and performance - Practice for metal powder bed fusion process to meet critical applications. 5 Feedstock and Powder Batches 5.1 The material supplier shall package the powder...
Get More
AS ISO/ASTM 52901:2021 pdf free Free AS Standards

AS ISO/ASTM 52901:2021 pdf free

AS ISO ASTM 52901:2021 pdf free.Additive manufacturing - General principles - Requirements for purchased AM parts. 4.3.3 Tolerances The tolerances shall be specified (e.g. general tolerances, see ISO 2768-1 and ISO 2768-2, and/or specific, ISO 1101), including...
Get More
AS ISO 16809:2020 pdf free Free AS Standards

AS ISO 16809:2020 pdf free

AS ISO 16809:2020 pdf free.Non-destructive testing — Ultrasonic thickness measurement. 5 General requirements 5.1 Instruments The following types of instruments shall be used to achieve thickness measurement: a) dedicated ultrasonic thickness measurement instruments with numerical display showing...
Get More

LEAVE A REPLY

Anonymous netizen Fill in information