IEC 63092-1-2020 pdf free.Photovoltaics in buildings – Part 1: Requirements for building-integrated photovoltaic modules.
The document is addressed to manufacturers, planners, system designers, installers, testing institutes and building authorities.
This document does not apply to concentrating photovoltaic modules.
This document addresses requirements on the BIPV modules in the specific ways they are intended to be mounted but not the mounting structure itself, which is within the scope of
IEC 63092-2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 61082-1, Preparation of documents used in electrotechnology — Part 1: Rules
IEC 6121 5-1 , Terrestrial ptiotovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements
IEC 61215-1-1, Terrestrial photovoltaic (PV) modules — Design qualification and type approval— Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
IEC 61215-1-2, Terrestrial photovoltaic (PV) modules — Design qualification and type approval— Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
IEC 61215-1-3, Terrestrial photovoltaic (PV) modules — Design qualification and type approval— Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
IEC 61215-1-4, Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-4: Special requirements for testing of thin-film Cu(in,Ga)(S,Se)2 based photovoltaic (PV) modules
3 Terms and definitions
For the purposes of this document, terms and definitions given in IEC 61215-1, IEC 61215-2,IEC TS 61836, IEC 63092-2 and ISO 12543-1 (in case the module contains one or more glass sheets)，together with the following, apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
IEC Electropedia: available at http://www .electropedia.org/
Iso Online browsing platform: available at http://www.iso.org/obp
3.1 building product any product or kit which is produced and placed on the market for incorporation in a permanent manner in buildings or parts thereof and the performance of which has an effect on the performance of the buildings with respect to the following basic building requirements:
a) Mechanical resistance and durability
b) Safety in case of fire
c) Hygiene, health and the environment
d) Safety and accessibility in use.IEC 63092-1 pdf free download.