IEC 60130-9-2011 pdf download.Connectors for frequencies below 3 MHz – Part 9: Circular connectors for radio and associated sound equipment.
This part of IEC 60130 relates to circular connectors for radio and associated sound equipment.
NOTE IEC 61076-2-106 specifIes connectors with a similar mating interface for connectors M16x0,75 with screw- locking and degree of protection 1P40 or 1P65/lP67 and with M16x0.75 screw-locking accessory As the IEC 60130-9 connector styles mating with the corresponding ones of IEC 61076-2-106 do not have a locking mechanism specified they are therefore not appropriate for industrial process measurement and control equipment.
Users of this IEC 60130-9 standard should be aware that some of the lEG 61076-2-106 styles could be mated but not locked to some connector styles of this IEC 60130-9 standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEG 60068-1:1988, Environmental testing — Part 1: General and guidance Amendment 1 (1992)
IEC 60512 (all parts), Connectors for electronic equipment — Basic testing procedures and measuring methods
IEC 60512-1-1, Connectors for electornic equipment — Tests and measurements — Part 1-1: General examination — Test la: Visual examination
IEG 60512-1-2, Connectors for electronic equipment — Tests and measurements — Part 1- 2:General examination — Test ib: Examination of dimension and mass
IEC 60512-2-1, Connectors for electronic equipment — Tests and measurements —Part 2- 1:Electronic continuity and contact resistance tests — Test 2a: Contact resistance — Millivolt level method
IEG 60512-3-1, Connectors (or electronic equipment — Tests and measurements —Part 3-1: Insulation tests — Test 3a: Insulation resistance
IEG 60512-4-1, Connectors for electronic equipment — Tests and measurements —Part 4-1: Voltage stress tests — Test 4a: Voltage proof
IEC 60512-7-1, Connectors (or electronic equipment — Tests and measurements — Part 7-1: Impact tests (free connectors) — Test 7a: Free fall (repeated)
IEC 60512-7-2, Connectors (or electronic equipment — Tests and measurements — Part 7-2: Impact tests (free components) — Test 7b: Mechanical strength impacts and measurements I
IEC 60512-11-9, Connectors for electronic equipment — Tests and measurements — Part 11-9:
Climatic tests — Test lii: Dry heat
IEC 60512-11-10. Connectors for electronic equipment — Tests and measurements — Part 11-10: Climatic tests — Test llj: Cold
IEC 60512-11-12, Connectors for electronic equipment — Tests and measurements — Part 11-12: Climatic tests — Test I im: Damp heat, cyclic
IEC 60512-13-2, Connectors for electronic equipment — Tests and measurements — Part 13-2:
Mechanical operation tests — Test 13b: Insertion and withdrawal forces
IEG 60512-16-5, Connectors for electronic equipment — Tests and measurements — Part 16-5: Mechanical tests on contacts and terminations — Test 16e: Gauge retention force (resilient contacts)
IEC 60512-17-1, Connectors for electronic equipment — Tests and measurements — Part 17-1: Cable clamping tests — Test 1 7a: Cable clamp robustness
IEC 60512-1 7-2, Connectors for electronic equipment — Tests and measurements — Part 17-2: Cable clamping tests — Test 1 7b: Cable clamp resistance to cable rotation2
IEC 60512-17-3, Connectors for electronic equipment — Tests and measurements — Part 17-3: Cable clamping tests — Test 1 7c: Cable clamp resistance to cable pull (tensile)
IEC 60512-17-4, Connectors for electronic equipment — Tests and measurements — Part 17-4: Cable clamping tests — Test 1 7d: Cable clamp resistance to cable Torsion
IEC 6 1076-2-106, Connectors for electronic equipment — Product requirements — Part 2-106: Circular connectors — Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection 1P40 or IP65/673
ISO 1302, Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation
3 Technical information
3.1 IEC type designation
Connectors according to this part of IEC 60130 shall be designated by:
a) the reference to this standard: 60130-9 lEG;
b) a serial number according Table 1.
3.2 Contact arrangements and connections
The contact arrangements of each type of connector are shown in Table 1.
NOTE 1 The numbering of the contacts is shown as seen on the mating face of the female connector, unless otherwise indicated.
NOTE 2 The male connector Type 05 can be inserted in a female connector Type 08 in either of the two positions A or B (see Annex C).
The switch is actuated by the short round pin 1, when the male connector is inserted in position B.
The construction of the switch shall be such that it opens properly when the round pin is inserted and spring 4 is in contact with the pin. In this position, there shall be no connection between contact 3 and the round pin.
The use of the socket connector with switch and its circuitry depends upon the switching function which is to take place when the male connector is inserted.
The circuitry shown in Annex C is suggested to illustrate the use of the switch.
4 Dimensional information
The dimensions in millimetres are original.
Dimensions and tolerances are given in Tables 2 up to and including Table 29.
The size and suspension system of the sockets shall be such that the insertion and withdrawal forces are in accordance with the requirements given in Clause 8.IEC 60130-9 pdf download.