BS EN 54-29:2015 pdf free.Fire detection and fire alarm systems Multi-sensor fire detectors – Point detectors using a combination of smoke and heat sensors.
BS EN 54-29 This European Standard specifies requirements, test methods and performance critena for point-type multi- sensor fire detectors for use in fire detection systems installed in buildings (see EN 54-1:2011), incorporating in one mechanical enclosure at least one optical or ionization smoke sensor and at least one heat sensor. The overall fire detection performance is determined utilizing the combination of the detected phenomena.
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of point detectors using a combination of smoke and heat sensors to this European Standard
Point detectors using a combination of smoke and heat sensors having special characteristics suitable for the detection of specific fire risks are not covered by this European Standard. The performance requirements for any additional functions are beyond the scope of this European Standard (e.g. additional features or enhanced functionahty for which this European Standard does not define a test or assessment method).
NOTE Certain types of detector contan radioactive materials The national requirements for radiation protection differ from country to country and they are not specified In this European Standard
2 Normative references
The following documents, in whole or in part are normatively referenced in this document and are Ndispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 54-1:2011, Fire detection and fire alarm systems – Pail 1: IntroductIon
EN 54-5:2000, Fire detection and fre alarm systems – Pail 5: Heat detectors – Point detectors
EN 54-5:2000/Al :2002. Fire detection and tire alarm systems – Pail 5: Heat detectors – Point detectors EN 50130-4:2011, Alarm systems – Part 4: ElectromagnetIc competiblflty. Product family standard: Immunity requirements for components of fire, intruder, hold up. CC TV, access control and social alarm systems EN 60068-1:1994, Environmental testing – Part 1: General and guidance (IEC 60068-1:1988)
EN 60068-2-1:2007, EnvIronmental testing – Part 2-1: Tests – Test A: Cold (IEC 60068-2-1.2007)
EN 60068-2-6:2008, Environmental testing – Pail 2-6. Tests- Test Fc: Vibration (sinusoidal) (IEC 60068-2- 6:2008)
EN 60068-2-27:2009. Environmental testing – Part 2-27: Tests – Test Ea and guidance: Shock (IEC 60068-2- 27:2009)
EN 60068-2-30:2005. Environmental testing – Pail 2-30: Tests – Test Db: Damp heat, cyclic (12 h • 12 h cycle) (IEC 60068-2-30:2005).BS EN 54-29 pdf download.