AS/NZS 62841.4.1-2018 pdf free.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety Part 4.1: Particular requirements for chain saws.
5.14 Addition:
For tests carried out at any percentage of rated input or rated current, except for no-load, the saw chain and the guide bar may be removed and the chain saw loaded by means of a brake.
5.17 Addition:
The mass of the machine includes the heaviest guide bar and saw chain combination in accordance with 8.14.2 C) 101) as well as the lubrication tank, if any, filled to the maximum specified level, but excludes the guide bar cover.
5.101 For tests that are performed at maximum speed and no-load, the manufacturer may need to provide special hardware and/or software.
6 Radiation, toxicity and similar hazards
This clause of Part 1 is applicable.
7 Classification
This clause of Part 1 is applicable.
8 Marking and instructions
This clause of Part 1 is applicable, except as follows:
8.2 Addition:
ChaIn saws shall be marked with safety information which shall be written in one of the official languages of the country in which the machine is to be sold or marked with the appropriate symbol:
— Wear eye protection” or a relevant safety sign of ISO 7010 or the safety sign specified in Annex AA;
— Wear ear protection”, a relevant safety sign of ISO 7010 or the safety sign specified in Annex AA. This marking may be omitted if the measured sound pressure level at the operators ear in accordance with Annex I does not exceed 85 dB(A).
A combination of ISO safety signs, such as eye, ear, dust and head protection, is allowed. In addition, a combination of safety signs as specified in Annex AA is allowed
— “DO not expose to rain” or the safety sign specified in Annex AA, unless the chain saw has a degree of protection of at least IPX4.
— “Beware of chain saw kickback and avoid contact with bar tip”, or A.1.3 of
ISO 17080:2005.
— Always use chain saw two-handed” or A.3.1 of ISO 17080:2005.
For mains supplied machines:
Remove plug from the mains immediately if the cable is damaged or cut” or the safety sign specified in Annex AA.AS/NZS 62841.4.1 pdf download.