AS/NZS 62841.2.14:2016 pdf download.Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery- Safety Part 2.27: Particular requirements for hand-held planers.
6 Radiation, toxicity and similar hazards This clause of Part 1 is applicable.
7 Classification
This clause of Part 1 is applicable.
8 Marking and Instructions
This clause of Part 1 is applicable, except as follows:
8.1 Addition:
— rated no-load speed.
8.3 Addition:
— direction of rotation of the working spindle. This shall be indicated by an arrow, raised or sunk, or by other means no less visible and indelible.
8.14.1 Addition:
For planers, the additional safety instructions as specified in 8.14.1.101 shall be given. This part may be printed separately from the General power tool safety warnings.
8.14.1.101 Safety instructions for planers
a) Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may engage the surface leading to possible loss of control and serious injury.
b) Hold the power tool by insulated gripping surfaces, because the cutter may contact its own cord. Cutting a live wire may make exposed metal parts of the power tool live” and could give the operator an electric shock.
c) Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the workpiece by your hand or against the body leaves it unstable and may lead to loss of control.
8.14.2 b) Addition:
101) instructions on how to adjust the entire range of the depth of cut;
102) instruction on the correct use of the dust collection system.
8.14.2 c) Addition:
101) information about types of cutting heads which can be used, it applicable;
1 02) instructions for the changing of the blades and their adjustment to the correct position;
1 03) instruction on how to properly clean/clear the chip ejection opening.
9 Protection against access to live parts
This clause of Part 1 is applicable.
10 Starting
This clause of Part I is applicable.AS/NZS 62841.2.14 pdf download.