AS NZS 1891.3:2020 pdf download.Personal equipment for work at height Part 3: Manufacturing requirements for fall-arrest devices.
AS NZS 1891.3 specifies the requirements for the design and testing of fall-arrest devices which travel along a fixed or flexible anchorage line, and those which unreel an anchorage line.
2 Normative references
The following documents are referred to in the text in such a way that all of their content constitutes requirements of this document.
AS/NZS 1891, Industrial fall-arrest systems and devices (all parts)
AS(/NZS) 1891, Personal equipment for work at height (all parts)
ANSI/ASSP Z359.4,Safety Requirements For Assisted Rescue and Self-Rescue Systems, Subsystems And Components
ANSI/ASSP Z359.14, Safety Requirements For Self-Retracting Devices For Personal Fall Arrest and Rescue Systems
ANSI/ASSP Z359.15, Safety Requirements For Single Anchor Lifelines And Fall Arresters For Personal Fall Arrest Arid Rescue Systems
ANSI/ASSP Z359.16, Sa[ety Requirements For Climbing Ladder FaliArrest Systems
EN 353, Personal fall protection equipment (series)
EN 360, Personal protective equipment against falls from a height — Retractable type fall arresters
EN 1496, Personal foil protection equipment — Rescue lifting devices
EN 12841, Personal fall protection equipment — Rope access systems — Rope adjustment devices
3 Terms and definitions
No terms and definitions are listed in this document.
4 Conforming fall-arrest devices
The fall-arrest device shall conform to at least one of the standards listed under primary function in Table 1 and, where applicable, at least one of the standards listed under secondary function. In addition, textile line components of fall arrest devices shall meet the light degradation performance requirements of AS/NZS 1891.1.AS NZS 1891.3 pdf download.