AS IEC 62217-2021 pdf free.Polymeric HV insulators for indoor and outdoor use – General definitions, test methods and acceptance criteria.
AS IEC 62217 is applicable to polymeric insulators whose insulating body consists of one or various organic materials. Polymeric insulators covered by this standard include both solid core and hollow insulators. They are intended for use on HV overhead lines and in indoor and outdoor equipment.
The object of this standard is
— to define the common terms used for polymeric insulators;
— to prescribe common test methQds for design tests on polymeric insulators:
— to prescribe acceptance or failure criteria, if applicable:
These tests, criteria and recommendations are intended to ensure a satisfactory life-time under normal operating and environmental conditions (see Clause 5). This standard shall only be applied in conjunction with the relevant product standard.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050-471:2007, international Electrotechnical Vocabulary — Part 471: Insulators
IEC 60060-1, High-voltage test techniques — Part 1: General definitions and test requirements
IEC 60068-2-11, Environmental testing — Part 2: Tests. Test KA: Salt mist
IEC 60507, Artificial pollution tests on high-voltage insulators to be used on a.c. systems
IEC 60695-11-10, Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
IEC 60721-1, Classification of environmental conditions — Part 1: Environmental parameters and their seventies
IEC 60815-1, Selection and dimensioning of high-voltage insulators intended for use in polluted conditions — Part 1: Definitions, in formation and general principles
ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 4287，Geometrical Product Specifications (GPS) 一Surface Texture: Profile method 一 Terms, definitions and surface texture parameters
Iso 4892-1, Plastics – Methods of exposure to laboratory light sources – Part 1: General
GuidanceIsO 4892-2，Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc sources
3 Terms and definitions For the purposes of this document the terms and definitions given in IEC 60050-47 1:2007 and the following apply:
3.1 high voltage (HV) voltage over 1 000 V a.c. or over 1 500 V d.c. or over 1 500 V peak value
3.2  polymeric insulator insulator whose insulating body consists of at least one organic based material.AS IEC 62217 pdf download.