AGMA 917-B97 pdf free.AMERICAN GEAR MANUFACTURERS ASSOCIATION Design Manual for Parallel Shaft Fine – Pitch Gearing.
The iformation In this manual is meant to serve onlyasaguidetothedesignerolflne-pitchgears. It is not intended that it be the procedure which must be followed in the design of such gears, nor is it implied that using the procedures and data wiN necessaiily result in gears that will meet the requirements in every application. It remains the responsibility of the Individual designer to property evaluate the conditions in the particular application and to make use of prior experience or proper testing to confirm the suitability of the design.
1.6 Tooth form (spur and helIcal gearing, Internal and external)
The tooth form of the spur and helical gearing considered in this manual is L’wakjte. Unless specifically noted, all external spur and helical designs resulting from the procedures discussed in this manual wiN be conjugate with standard basic racks. See ANSI/AGMA 1003-G93.
The following documents contain provisions which, through reference In this text, constitute provisions ol the manual. At the time of publication, the editions were valid. All publications are subject to revision, and the users of this manual are encouraged to investigate the possibility of applying the most recent editions of the publications listed:
AGMA 203.03, Fine-Pitch On-Center Face Gears fox 20-Degree Involute Spur Pin.ons.
AGMA 900-F96, Style Manual for the Preparation of Standards, Information Sheets and Editorial Manuals.
AGMA 906-A94. Gear Tooth Surface Texture with Functional Considerations.
AGMA 908- B89, Geomeey Factors for Detes7nwing the Pitting Resistance and Bending Strength of Spur Helical and Herringbone Gear Teeth.
AGMA 910-C90, Formats for Fine-Pitch Gear Specification Data.
ANSI/AGMA 110.04, Nomenclature of Gear Tooth Failure Modes.
ANSI/AGMA 1003-G93, Tooth Proportions for Fine-Pitch Spur and He1kaJ Geanng.
ANSI/AGMA 1012-F90, Gear Nomenclature,Definitions of Terms with Symbols.
ANSI/AGMA 2000-A88, Gear aassification and inspection Handbook.
ANSI/AGMA 2001 -C95, Fundamental Rating Factoxs and Calculation Methods for Involute Spur and Helical Gear Teeth.
ANSI/AGMA 2002-B88, Tooth Thickness Specification and Measurement.
ANSI/AGMA 2004-B89, Gear Materials and Heat Treatment Manual.AGMA 917 pdf free download.