IEEE C37.5-1979 pdf free.IEEE Guide for Calculation of Fault Currents for Application of AC High-Voltage Circuit Breakers Rated on a Total Current Basis. This standard is a guide for the calculation offault currents for the application of...
IEEE C37.04-1979 pdf free
IEEE C37.04-1979 pdf free.An American National Standard IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis. Rated Interrupting Time. The rated interrupting time of a circuit breaker is the maxi-mum permissible...
IEEE 563-1978 (R2002) pdf free
IEEE 563-1978 (R2002) pdf free.IEEE Guide on Conductor Self-Damping Measurements. With the increasing interest and concern regarding the vibration of overhead conductors, and the emphasison the improvement of existing methods and the development of new techniques for...
IEEE 384-1981 pdf free
IEEE 384-1981 pdf free.IEEE Standard Criteria forIndependence of Class 1EEquipment and Circuits. This standard describes the independencerequirements of the circuits and equipmentcomprising or associated with Class 1E systems,including those required for safe shutdown. Itsets forth criteria for...
IEEE N323-1978 pdf free
IEEE N323-1978 pdf free.American National Standard Radiation Protection InstrumentationTest and Calibration. This standard establishes calibration methods for portable radiation protection instruments used for detection andmeasurement of levels of ionizing radiation fields or levels of radioactive suface contamination.For...
IEEE C57.12.80-1978 pdf free
IEEE C57.12.80-1978 pdf free.An American National Standard IEEE Standard Terminology forPower and Distribution Transformers. Polarity,Angular Displacement,and PhaseSequence. Lead Polarity. A designation of therelative instantaneous direction of the currentsin the leads of a transformer. Primary and secondary leads...
IEEE C50.13-1977 pdf free
IEEE C50.13-1977 pdf free.American National Standard Requirements for Cylindrical-RotoSynchronous Generators. The requirements in this standard apply to 60 hertz cylindrical-rotor synchronous generators, except those covered inC50.14-1977. All requirements and definitions, except as specifically covered in this standard,...
IEEE 683-1976-R2006 pdf free
IEEE 683-1976-R2006 pdf free.IEEE Recommended Practice for Block Transfers in CAMAC Systems. The basic CAMAC specification (see Ref ) defines a single CAMAC operation as the activity which occurs inresponse to a single CAMAC command.This activity may...
IEEE 661-1978 pdf free
IEEE 661-1978 pdf free.IEEE Standard Method for Determining Objective Loudness Ratings of Telephone Connections. The methods that are used to measure the transmission performance of telephone connections may be divided into twoclasses: objective methods and subjective methods....
IEEE C50.14-1977 pdf free
IEEE C50.14-1977 pdf free.American National Standard Requirements for Combustion GasTurbine Driven Cylindrical Rotor Synchronous Generators. The power output of a combustion gas turbine, for a given combustion temperature, is a function of the density of theinlet air,which,...