Free ASTM Standards Download

ASTM D718-86 pdf free.Standard Test Methods for Analysis of Aluminum Silicate Pigment. Reagent grade chemicals shall be used in all tests.Unless otherwise indicated, it is intended that all reagents shallconform to the specifications of the Committee on...

ASTM D714-02 pdf free.Standard Test Method for Evaluating Degree of Blistering of Paints. This test method employs photographic reference stan-dards to evaluate the degree of blistering that may developwhen paint systems are subjected to conditions which willcause...

ASTM D713-90 pdf free.Standard Practice for Conducting Road Service Tests on Fluid Traffic MarkingMaterials. Apply the test stripes 4 in. (100 mm) in width andtransversely on the road.At the option of the purchaser, the teststripes may be...

ASTM C1070-01 (2020) pdf free.Standard Test Method for Determining Particle Size Distribution of Alumina or Quartzby Laser Light Scattering. If required and available,use the index of refractioncapability of the instrument. Many of the common compoundshave their index...

ASTM C792-15 (2020) pdf free.Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, andChalking of Elastomeric Sealants. Unless otherwise specified by those authorizing the test,standard conditions of temperature and relative humidity forthe test shall...

ASTM C724-91 (2020) pdf free.Standard Test Method for Acid Resistance of Ceramic Decorations on ArchitecturalType Glass. This test method covers qualitative determination of theacid resistance of the ceramic decoration on architectural glass.The values stated in Sl units...

ASTM C421-08 (2020) pdf free.Standard Test Method for Tumbling Friability of Preformed Block-Type and PreformedPipe-Covering-Type Thermal lnsulation. This test method covers determination of the mass lossof preformed block-type and preformed pipe-covering-typethermal insulation as a result of a...

ASTM C408-88 (2020) pdf free. Standard Test Method for Thermal Conductivity of Whiteware Ceramics. The ceramic test specimens used in the thermal conductivity instrument shall be accurately ground cylinders.Thespecimens may be formed using normal ceramic procedures ofslip-casting,...

ASTM B972-10 (2020) pdf free.Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intendedfor use in Electronic Application. Whether the nickel is applied by electroplating or bymechanical cladding,coatings less than 50 uin.(0.00005 in.) in thicknesswill not...

ASTM B242-99 (2020) pdf free.Standard Guide for Preparation of High-Carbon Steel for Electroplating. Electropolishing is used to remove highly stressedmetal and metal debris from the surface of cold-worked steel,thereby improving the bond strength and corrosion resistanceof electroplated...