IEC 62035-2012 pdf download.Discharge lamps (excluding fluorescent lamps) – Safety specifications.
It may be expected that lamps which comply with this standard will operate safely at supply voltages between 90 % and 110 % of rated supply voltage and when operated with a ballast complying with IEC 60922 and IEC 60923, with a starting device complying with IEC 60926 and lEG 60927, and in a luminaire complying with lEG 60598-1.
2 Normative references
Les documents de référence suivants sont indispensables pour l’application du present document. Pour les références datées, seule l’édition citée s’applique. Pour es références non datées, Ia dernière edition du document de référence s’applique (y compris es éventuels amendements).
IEC 60050(845), International Electrotechnical Vocabulary (1EV) — Chapter 845: Lighting lEG 60061-1, Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps
lEG 60061-2, Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 2: Lamphoiders
lEG 60061-3, Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 3: Gauges
lEG 60061-4, Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 4: Guidelines and general information
lEG 60155, Glow-starters for fluorescent lamps
lEG 60598-1, Luminaires — Part 1: General requirements and tests lEG 60662, High-pressure sodium vapour lamps
IEC 60695-2-1/0, Fire hazard testing — Part 2: Test methods — Section 1/Sheet 0: Glow-wire test methods — General
IEC 60922, Auxiliaries for lamps — Ballasts for discharge lamps (excluding tubular fluorescent lamps) — General and safety requirements
IEC 60923, Auxiliaries for lamps — Ballasts for discharge lamps (excluding tubular fluorescent lamps) — Performance requirements
IEC 60926, Auxiliaries for lamps — Starting devices (other than glow starters) — General and safety requirements
IEC 60927, Auxiliaries for lamps — Starting devices (other than glow starters) — Performance requirements
IEC 61167, Metal halide lamps
ISO 4046, Paper, board, pulp and related terms — Vocabulary
3 Definitions
For the purposes of this International Standard, the following terms and definitions apply, as well as others given in lEG 60050(845).
3.1 high-intensity discharge lamp; HID lamp
electric discharge lamp in which the light-producing arc is stabilized by wall temperature and the arc has a bulb wall loading in excess of 3 watts per square centimetre
NOTE HID lamps include groups of lamps known as high-pressure mercury, metal halide and high-pressure sodium lamps.
(1EV 845-07-19]
3.2 high-pressure mercury (vapour) lamp
high-intensity discharge lamp in which the major portion of the light is produced, directly or indirectly, by radiation from mercury operating at a partial pressure in excess of 100 kilopascals
NOTE This tern, covers clear, phosphor coated (mercury fluorescent) and blended lamps. In a fluorescent mercury discharge lamp, the light is produced partly by the mercury vapour and partly by the layer of phosphors excited by the ultraviolet radiation of the discharge.
(1EV 845-07-20]
3.3 blended lamp; self-ballasted mercury lamp (USA)
lamp containing in the same bulb certain elements of a mercury vapour lamp and an incandescent lamp filament connected in series.IEC 62035 pdf download.