CISPR 32-2019 pdf free.Electromagnetic compatibility of multimedia equipment – Emission requirements.
Replace the existing reference to CISPR 16-1-1.2010 and its amendments with:
CISPR 16-1-1:2015. Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-1: Radio disturbance and immunity measuring apparatus — Measuring apparatus
Replace the existing reference to CISPR 16-1-2:2003 and its amendments with:
CI SPR 16-1-2:2014. Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-2: Radio disturbance and immunity measuring apparatus — Coupling devices for conducted disturbance measurements
CISPR 16-1-2:2O14IAMD1:2017
Add to CISPR 16-1-4:2010 the following amendment:
CISPR 16-1-4:2010/AMD2:2017
Replace the existing reference to CISPR 16-2-1:2008 and its amendments with:
CISPR 16-2-1:2014, Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-1: Methods of measurement of disturbances and immunity — Conducted disturbance measurements
CISPR 16-2-1:2O14IAMD1:2017
Replace the existing reference to CISPR 16-2-3:20 10 and its amendments with:
CISPR 16-2-3:2016. Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-3: Methods of measurement of disturbances and immunity — Radiated disturbance measurements
Add to CISPR 16-4-2:2011 the following amendments:
CISPR 16-4-2:2011/AMD1:2014
CISPR 16-4-2:201 1/AMD2:2018
Delete the normative reference to ANSI C63.5-2006 Add the following new references to the existing list:
CISPR 16-1-5:2014, Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-5: Radio disturbance and immunity measuring apparatus — Antenna calibration sites and reference test sites for 5 MHz to 18 GHz CISPR 16-1-5:2014/AMD1:2016
3.1 Terms and definitions
3.1.30 signal/control port Replace the existing Note I to entry with the following note:
Note 1 to entry: Examples include RS.232. Universal Serial Bus (USB), High-Definition Multimedia Interface (HDMI). IEEE Standard 1394 (Fire Wire), and waveguide ports used for interconnecting MME.
3.2 AbbrevIations
Add the following abbreviation to the existing list:
PSD Power Spectral Density
6.2 Host systems and modular EUT
Replace the third bullet with the following new bullet:
a plug-in module, for example a portable memory drive;
9 Test report
Replace, in the second bullet point of the last existing list, “Table 1 of CISPR 16-4-2:201 V by Table 1 of CISPR 16-4-2:20 1 1/AMD1 :2014/AMD2:201 8.
10 Compliance with this publication
Replace last sentence of the second existing paragraph with the following new sentence: Requirements for conducted emission measurements are defined in Table A7 and Table A.9 to Table A.13 with the restrictions defined in Table A.8.
11 Measurement uncertainty
Replace the existing clause with the following new heading and text:
11 Measurement instrumentation uncertainty
Where guidance for the calculation of the instrumentation uncertainty of a measurement is specified in CISPR 16-4-2: 2011/AMD1:2014/AMD2:2018, Clauses 5, 7 and 8, except for measurements in accordance with C.4.1 .6.4, this shall be followed and for these measurements the determination of compliance with the limits in this standard shall take into consideration the measurement instrumentation uncertainty in accordance with CISPR 16-4-2: 201 IIAMD1 :2014 clause 4. For measurements in accordance with C.4.1.6.4, the measurement instrumentation uncertainty shall not be taken into account in the determination of compliance.
For all measurements where guidance for the calculation of measurement instrumentation uncertainty is given in CISPR 16-4-2: 201 1/AMD1 :2014/AMD2:2018, Clauses 5, 7 and 8, this shall be used and reported as described in Clause 9. Calculations to determine the measurement result and any adjustment of the test result required when the test laboratory uncertainty is larger than the value for Ucspr given in CISPR 16-4-2:2011/ AMD1:2014/AMD2:2018. Table 1 shall be included in the test report as described in Clause 9.
For measurements where no guidance for the calculation of the instrumentation uncertainty is specified in CISPR 16-4-2: 2011/AMD1:2014/AMD2:2018 the measurement instrumentation uncertainty shall not be taken into account for determining compliance with the limits in this standard.CISPR 32 pdf free download.