BS EN 4611-007:2018 pdf free.Aerospace series – Cables, electrical, forgeneral purpose, single and multicoreassembly – XLETFE Family.
BS EN 4611-007 This European Standard specifies the characteristics ofUVlaser printable,nickel plated copper conductorelectrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer (XLETFE) family for use in theon-board electrical systems of aircraft operating at temperatures between-65 °Cand 150 °C.The voltagerating is 600 V rms at sea level. This insulation system has been used in aerospace applications using115Vac (phase-to-neutral)400 Hz and 28 V dc.Verification of the suitability of cables for use in otherelectrical systems is the responsibility of the user.
These cables are suitable for airframe use.In case of conflict between this standard and other referenceddocuments the requirements of this standard shall take precedence.
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references,only the edition cited applies. Forundated references, the latest edition of the referenced document (including any amendments) applies.EN 2083,Aerospace series —Copper or copper alloy conductors for electrical cables —Product standardEN 2084,Aerospace series – Cables,electrical, general purpose, with conductors in copper or copperalloy —Technical specification
EN 2235,Aerospace series —Single and multicore electrical cables, screened and jacketed -Technicalspecification
EN 3475-100(all parts),Aerospace series — Cables, electrical, aircraft use —Test methods — Part 100:General
EN 4611-002,Aerospace series —Cables, electrical, for general purpose, single and multicore assembly -XLETFE Family —Part 002: General
EN 9133,Aerospace series — Quality Management Systems — Qualification Procedure for AerospaceStandard Products
Terms, definitions, symbols and abbreviations
For the purposes of this document,the terms,definitions，symbols and abbreviations given inEN 3475-100 apply.
Conductor:The cable conductors shall be made of nickel plated copper according to EN 4611-002 and EN 2083 code D
Insulation for conductor all size codes
first insulator extruded XLETFE, coloured blue or a contrasting colour if the second is blue;
second insulator extruded XLETFE.
For single core, it shall be possible to mark the outer insulation by UV laser printing.BS EN 4611-007 pdf download.