AS/NZS ISO 8124.5:2020 pdf download.Safety of toys Part 5: Chemical toys (sets) other than experimental sets.
4 Plaster of Paris (gypsum) moulding sets
4.1 Marking
See D.2 and D.3.
The primary packaging shall, in addition to the marking required in Clause 9, bear the following:
“Warning! Not suitable for children under (9 years. For use under adult supervision. Read the instructions before use, follow them and keep them for reference.”
(9 The age is to be specified by the manufacturer, authorized representative or importer. It shall not be below 5 years.
4.2 FIrst aid Information
The instructions for use shall, in addition to the general first aid information in 9.2 d), contain the following:
— “In case of eye contact: Wash out eye with plenty of water, holding eye open. Seek immediate medical advice.”
— “If swallowed: Wash out mouth with water, drink some fresh water. Do not induce vomiting. Seek immediate medical advice.”
4.3 Safety rules
The instructions for use shall, in addition to the rules required in 9.4, contain the following safety rules:
— “Do not place the material in the mouth.”
— “Do not inhale dust or powder.”
— “Do not apply to the body.”
5 Oven-hardening plasticised PVC modelling clay sets
5.1 Chemical substances See 0.4.
These modelling clay sets shall consist of PVC (polyvinylchloride) and plasticisers and may contain modifiers, fillers (e.g. China clay) and colourants. Only plasticisers given in Table 1 shall be used.
The mass fraction of plasticisers in the mixture shall not exceed 30 %. The vinyl chloride monomer content shall be below 1 mg/kg.
5.2 Marking
See 0.2 and 0.3.
The primary packaging shall, in addition to the marking required in Clause 9, bear the following warning:
“Warning! Not suitable for children under (9 years. For use under adult supervision. Read the Instructions before use, follow them and keep them for reference.”
(9 The age is to be specified by the manufacturer, authorized representative or importer. It shall not be below 8 years.
5.3 First aid information
The instructions for use shall, in addition to the general first aid information in 9.2 d), contain the following:
— “In case of accidental overheating and inhalation of poisonous gases: Remove person to fresh air and seek immediate medical advice.”
5.4 Safety rules
The instructions for use shall, in addition to the rules required in 9.4, contain the following safety rules:
— “Do not place the material in the mouth.
— “Do not exceed a hardening temperature of 130°C or harmful gases may be produced.”
— “Do not exceed a hardening time of 30 minutes.”
— “The hardening process is not part of the function of the toy and should be carried out by the supervising adult.”
— “Use a domestic oven thermometer, e.g. bimetal, to measure the temperature.”
— “Do not use a glass thermonwter.AS/NZS ISO 8124.5 pdf download.
AS/NZS ISO 8124.5:2020 pdf download
Note:
Can you help me share this website on your Facebook or others? Many thanks!