AS ISO 22915.2:2015 pdf free

09-08-2021 comment

AS ISO 22915.2:2015 pdf free.Industrial trucks – Verification of stability Part 2: Counterbalanced trucks with mast.
This part of ISO 22915 specifies the tests for verifying the stability of counterbalanced trucks with masts, equipped with fork arms or with load handling attachments. It is not applicable to those trucks designed for handling freight containers, dealt with by ISO 2291591)
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 5053, Powered industrial trucks — Terminology
ISO 22915-1. Industrial trucks — Verification of stability — Part 1: General 2)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 22915-1 apply.
4 Test conditions
4.1 General
See ISO 22915-1.
4.2 Position of truck on tilt table
4.2.1 Load and steer axles
The load and steer axles are defined by Figure 1.
This part of ISO 22915 specifies the tests for verifying the stability of counterbalanced trucks with masts, equipped with fork arms or with load handling attachments. It is not applicable to those trucks designed for handling freight containers, dealt with by ISO 2291591)
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 5053, Powered industrial trucks — Terminology
ISO 22915-1. Industrial trucks — Verification of stability — Part 1: General 2)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 22915-1 apply.
4 Test conditions
4.1 General
See ISO 22915-1.
4.2 Position of truck on tilt table
4.2.1 Load and steer axles
The load and steer axles are defined by Figure 1.AS ISO 22915.2 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS/NZS 60079.5:2015 pdf free Free AS Standards

AS/NZS 60079.5:2015 pdf free

AS/NZS 60079.5:2015 pdf free.Explosive atmospheres Part 5: Equipment protection by powdered filling 'q'. 4.1.1.3 Containers intended to be opened for repair Electrical equipment, parts of electrical equipment, or Ex components that are designed to be repaired shall...
Get More
AS/NZS 60079.2:2015 pdf free Free AS Standards

AS/NZS 60079.2:2015 pdf free

AS/NZS 60079.2:2015 pdf free.AUSTRALIAN/NEW ZEAL AND STANDARD Explosive atmospheres. 5 Constructional requirements for pressurized enclosures 5.1 Enclosure The pressurized enclosure shall have a degree of protection in accordance with Table 2. For Level of Protection pxb with...
Get More
AS/NZS 5263.1.3:2016 pdf free Free AS Standards

AS/NZS 5263.1.3:2016 pdf free

AS/NZS 5263.1.3:2016 pdf free.Gas appliances Part 1.3: Gas space heating appliances. 2.1 SCOPE This Clause of AS 5263.0 applies. 2.2 GENERAL DESIGN REQUIREMENTS This Clause of AS 5263.0 applies, except as modified below. 2.2.13 IJesign olappliance base...
Get More

LEAVE A REPLY

Anonymous netizen Fill in information