AS 4439.3:2019 pdf download

09-04-2021 comment

AS 4439.3:2019 pdf download.Wastes, sediments and contaminated soils Part 3: Preparation of leachates – Bottle leaching procedure.
5 Reagents
5.1 General requirement
Unless otherwise specified, all reagents shall be of analytical reagent grade. All containers shall meet the requirements of Clause 6.1.
5.2 Reagent water
Water of laboratory Grade 1 in accordance with ISO 3696 shall be used.
5.3 Leaching fluid
5.3.1 General
The leaching fluid shall be tested immediately before use to ensure conformity to the specified pH value. Leaching fluids not prepared immediately prior to use shall also be examined for indication of contamination or deterioration. In the presence of microbial growth, colouration, solid or suspended matter, the solution shall be discarded and fresh leaching fluid prepared.
5.3.2 Leaching fluid pH 2.9
Leaching fluid pH 2.9 shall be prepared as follows:
(a) Add 5.7 mL of glacial acetic acid (P20 = 1.01 g/mL) to 900 mL of water.
(h) Dilute to I L with water. The pH of this fluid should be 2.8 to 3.0 and adjustment of pH is not permitted.
5.3.3 Leaching fluid pH 5.0
Leaching fluid of p1-f 5.0 shall be prepared as follows:
(a) Add 5.7 mL of glacial acetic acid (P20 = 1.01 g/mL) to approximately 900 mL of water.
(b) Add 64.3 mL of 1 mol/L sodium hydroxide solution, dilute to I L with water and mix well.
(c) Where the pH is not 4.9 to 5.1, adjust by dropwise addition of 1 mol/L acetic acid or 1 mol/L sodium hydroxide solution as appropriate.
(d) Store in an airtight container.
5.3.4 Leaching fluid pH 9.2
Leaching fluid of pH 9.2 shall be prepared as follows:
(a) Dissolve 38.2 g of sodium tetraborate decahydrate (borax) in approximately 900 mL of water.
(b) Dilute to 1 L with water and mix well. The p1-I of this fluid shall be 9.1 to 9.3. Where the pH Is not between these levels the fluid shall be discarded. The pH shall not be adjusted.
(c) Store in an airtight container.
5.4 Compressed gas
Pressure controllable within the range 0 kPa to 350 kPa, and free of particulate and organic contaminants.AS 4439.3 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS/NZS 60079.5:2015 pdf free Free AS Standards

AS/NZS 60079.5:2015 pdf free

AS/NZS 60079.5:2015 pdf free.Explosive atmospheres Part 5: Equipment protection by powdered filling 'q'. 4.1.1.3 Containers intended to be opened for repair Electrical equipment, parts of electrical equipment, or Ex components that are designed to be repaired shall...
Get More
AS/NZS 60079.2:2015 pdf free Free AS Standards

AS/NZS 60079.2:2015 pdf free

AS/NZS 60079.2:2015 pdf free.AUSTRALIAN/NEW ZEAL AND STANDARD Explosive atmospheres. 5 Constructional requirements for pressurized enclosures 5.1 Enclosure The pressurized enclosure shall have a degree of protection in accordance with Table 2. For Level of Protection pxb with...
Get More
AS/NZS 5263.1.3:2016 pdf free Free AS Standards

AS/NZS 5263.1.3:2016 pdf free

AS/NZS 5263.1.3:2016 pdf free.Gas appliances Part 1.3: Gas space heating appliances. 2.1 SCOPE This Clause of AS 5263.0 applies. 2.2 GENERAL DESIGN REQUIREMENTS This Clause of AS 5263.0 applies, except as modified below. 2.2.13 IJesign olappliance base...
Get More

LEAVE A REPLY

Anonymous netizen Fill in information