AS 4024.3401:2018 pdf free.Safety of machinery Part 3401: Safety of packaging machines – Terminology and classification of packaging machines and associated equipment.
AS 4024.3401 defines the field of packaging machines. The machines defined fall within the
following general groups:
— tilling machines:
— closing machines;
labelling, decorating and coding machines;
— cleaning, sterilizing, cooling and drying machines;
— fill and seal machines:
— inspection machines:
— container and packaging component handling machines;
— form, fill and seal machines;
— carton erecting, carton closing and cartoning machines:
— wrapping machines;
— group or secondary packaging machines:
palletizers, depalletizers and ancillary equipment;
— pallet wrapping machines:
— strapping machines.
This part of EN 415 indicates the relevant machine specific part of EN 415, or another relevant standard,
where safety requirements for dealing with the hazards associated with these machines can be found.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 415-2, Packaging machines safety — Part 2: Pre-formed rigid container packaging machines
EN 415-3, Safety of packaging machines — Part 3: Form, till and seal machines
EN 415-4, Safetyof packaging machines — Part 4: Palletisers and depalletisers
EN 415-5, Safety of packaging machines — Part 5: Wrapping machines
EN 415-6, Safety of packaging machines — Part 6: Pallet wrapping machines
EN 4157, Safety of packaging machines — Part 7: Group and secondary packaging machines2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7345, Thermal insulation — Physical quantities and definitions
ISO 13370, Thermal performance of buildings — Heat transfer via the ground — Calculation methods ISO 52000-1:2017, Energy performance of building — Overarching EPB assessment — Part 1: General framework and procedures
ISO 52010-I, Energy performance of buildings — External climatic conditions — Part 1: Conversion of climatic data for energy calculations
ISO 520 16-1, Energy performance of buildings Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures
NOTE I Default references to EPH standards other than ISO 52000-1 are identified by the EPB module code number and given in Annex A (normative template in Table A.i) and Annex B (informative default choice in Table B.1).
EXAMPLE EPH module code number: MS—S. or M5-5,1 (if module MS—S is subdivided), or MS—S/i (if reference to a specific clause of the standard covering M5—5).
NOTE 2 In this document, there are no choices in references to other EPH standards. The sentence and note above is kept to maintain uniformity between all EPB standards.AS 4024.3401 pdf download.