AS 3920:2015 pdf free

09-08-2021 comment

AS 3920:2015 pdf free.Pressure equipment – Conformity assessment.
Unless specified by the parties concerned, this Standard does not specifically apply to—
(I) installation of boilers. pressure vessels and pressure piping covered by AS 3892;
(ii) operation, servicing and maintenance of boilers, pressure vessels and piping covered by AS 3873;
(iii) in-service inspection of pressure equipment covered by AS/NZS 3788, except where such inspections identify a need for a fitness for service assessment, an alteration. modification or repair as indicated in Item (c) above; or
(iv) miniature boilers complying with the AMBSC Code.
It may be applied to similar equipment where agreed by parties concerned.
1.4 REFERENCEI) I)OCUMINTS
The documents referred to in this Standard are listed in Appendix A.
1.5 DEFINITIONS
For the purposes of this Standard, the definitions in AS 4942 and those below apply.
1.5.1 Alteration
A change to pressure equipment where the change may impair health or safety, hut does not
include safe routine maintenance, repair or replacement where the equipment is returned to
a state that matches the original design.
1.5.2 Accreditation body
A body that conducts and administers an accrcditatwri system and grants accreditation.
1.5.3 Audit
A full or partial formal review performed by an accredited or approved auditing organization in which compliance or non-compliance with all the system elements prescribed in the quality management Standard is ascertained.
1.5.4 Certification body
A body accredited or approved Ibr the purpose of certifying quality’ systems, design verifying bodies, manufacture inspection bodies, in-service inspection bodies or personnel.
1.5.5 Certified
Certified by a certification body.
1.5.6 Competent person
A person who has acquired, through education, training, qualification or experience or a combination of these, the knowledge and skill enabling that person to perform the task required.
1.5.7 Conformity
Fulfilment of a requirement.
NOTE: The term ‘confonnance’ is synonymous. Compare with ‘compliance’, which is taken to mean ‘to act in accordance with’.
1.5.8 Conformity assessment (CA)
Any activity’ concerned with determining directly or indirectly that relevant requirements are fulfilled.
NOTE: Typical examples of conformity assessment activities are sampling, testing and inspection, evaluation, verification and assurance of confonnity (supplier’s declaration, certification), registration, accreditation and approval, as well as other combinations.AS 3920 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS/NZS 60079.5:2015 pdf free Free AS Standards

AS/NZS 60079.5:2015 pdf free

AS/NZS 60079.5:2015 pdf free.Explosive atmospheres Part 5: Equipment protection by powdered filling 'q'. 4.1.1.3 Containers intended to be opened for repair Electrical equipment, parts of electrical equipment, or Ex components that are designed to be repaired shall...
Get More
AS/NZS 60079.2:2015 pdf free Free AS Standards

AS/NZS 60079.2:2015 pdf free

AS/NZS 60079.2:2015 pdf free.AUSTRALIAN/NEW ZEAL AND STANDARD Explosive atmospheres. 5 Constructional requirements for pressurized enclosures 5.1 Enclosure The pressurized enclosure shall have a degree of protection in accordance with Table 2. For Level of Protection pxb with...
Get More
AS/NZS 5263.1.3:2016 pdf free Free AS Standards

AS/NZS 5263.1.3:2016 pdf free

AS/NZS 5263.1.3:2016 pdf free.Gas appliances Part 1.3: Gas space heating appliances. 2.1 SCOPE This Clause of AS 5263.0 applies. 2.2 GENERAL DESIGN REQUIREMENTS This Clause of AS 5263.0 applies, except as modified below. 2.2.13 IJesign olappliance base...
Get More

LEAVE A REPLY

Anonymous netizen Fill in information