AS 2473.2:2015 pdf free

09-08-2021 comment

AS 2473.2:2015 pdf free.Valves for compressed gas cylinders Part 2: Outlet connections (threaded) and stem (inlet) threads.
The outlet connections specified in this Standard are listed in Table 2.1, and assigned to nominated gases in Table 2.2. The standard valve outlet connections are for use within the pressure range up to 20 000 kPa, based on the pressure conditions of the gas as specified in AS 2030.1. The pressure range applying to the valve outlet connection is intended to protect downstream equipment like pressure regulators from over-pressurized conditions (see Clause 2,2).
In addition, outlet connections for certain compressed gases are specified for use at settled pressures in the range between 20 001 and 31 500 kPa, and between 31 501 and 42 500 kPa.
For oxygen, additionally an outlet connection is specified for use between 20 001 and 25 000 kPa, and one for use at settled pressures between 25 001 and 31 500 kPa.
For liquefied petroleum gases the standard and limited outlet connections (Types 21, 26 and 41), apply up to 3450 kPa. For non-toxic, non-flammable refrigerant gases. the standard connection (Type 34) applies up to 5600 kPa.
Where the gas is not listed in Table 2.2, or is a gas mixture, the valve outlet connection shall be that given in Table 2.3 for the appropriate classification of gas or gas mixture, and for a pressure range up to 20 000 kPa.
The dimensions of the connections shall be according to Figures 2.1 to 2.28, ensuring the functional interchangeability of all the components of the connection. The leak tightness and integrity of each connection shall conform to Clause 2.2.
1 Following long standing practice from the first editions of AS 2473, the external thread in outlet connections is modified by reduction of major, minor and pitch diameters by 0.10 to 0. 1 5 mm to provide for ease of assembly in service. However, the tolerance band for the major diameter should he decreased to maintain thread engagement at minimum material conditions. This practice is similar to that in (‘GA V-i.
2 The outlet connections in this Standard are known by their Type number (e.g. Type 10). This designation or its abbreviation (e.g. Tl0) should be used where outlet connection identification is required on product, for example on connection nuts (see Clause 2.3) or on cylinder valves (see AS 2473.1).
3 Thread designations in Tables 2. 1 to 2.3 are from various origins, and care is necessary in their interpretation. In the designation 0.825-i4 NGO-LH-EXT, the value 0.825 refers to the major diameter and 14, to the threads per inch. In the designation G5/8 RH INT, G5/8 is a nominal size and comes from AS 1722.2 and Ru (or LII) and EXT or (INT) have been added in this Standard to indicate whether right or left hand threads are specified and whether the thread in the valve is internal or external.
Only regulators, manifolds and ancillary equipment with inlet connections compatible with the valve outlet connections in this standard, rated for the appropriate pressure, compatibility with the relevant gas, and intended application shall be connected to or installed downstream of the valve outlet connection.
Each outlet connection provides for screw threads that do not seal, but only hold a nipple against a seat in the valve outlet or against a washer.AS 2473.2 pdf download.

Download infomation Go to download
Note: Can you help me share this website on your Facebook or others? Many thanks!
AS/NZS 60079.5:2015 pdf free Free AS Standards

AS/NZS 60079.5:2015 pdf free

AS/NZS 60079.5:2015 pdf free.Explosive atmospheres Part 5: Equipment protection by powdered filling 'q'. Containers intended to be opened for repair Electrical equipment, parts of electrical equipment, or Ex components that are designed to be repaired shall...
Get More
AS/NZS 60079.2:2015 pdf free Free AS Standards

AS/NZS 60079.2:2015 pdf free

AS/NZS 60079.2:2015 pdf free.AUSTRALIAN/NEW ZEAL AND STANDARD Explosive atmospheres. 5 Constructional requirements for pressurized enclosures 5.1 Enclosure The pressurized enclosure shall have a degree of protection in accordance with Table 2. For Level of Protection pxb with...
Get More
AS/NZS 5263.1.3:2016 pdf free Free AS Standards

AS/NZS 5263.1.3:2016 pdf free

AS/NZS 5263.1.3:2016 pdf free.Gas appliances Part 1.3: Gas space heating appliances. 2.1 SCOPE This Clause of AS 5263.0 applies. 2.2 GENERAL DESIGN REQUIREMENTS This Clause of AS 5263.0 applies, except as modified below. 2.2.13 IJesign olappliance base...
Get More


Anonymous netizen Fill in information